Busy Bee

At some point during the past year BusyBee of Canada had redesigned its web site and in so doing invalidated most of the hyperlinks I had made to individual lathe parts. I have since updated the links. Please refer to my previous (and now updated) post.

Steelex Faceplate and Spindle Adapters

I received a Steelex 8-inch faceplate (D 1088) and a pair of inboard and outboard spindle adapters (D 1096 and D 1105) as a birthday gift. These were obtained from Amazon.com for substantially less than other sources (19.50 USD for the unthreaded faceplate, 7.80 USD for each adapter).

The adapter mounts to the rear of the faceplate and is held in place by three rather small hex head cap screws. I spun up the outboard side first and turned the lathe on at its slowest setting. A slight wobbling of the faceplate was detectable by eye and by feel. Ditto for the inboard side. For the sake of comparison, no such imbalance is detectable with my Nova chuck. I shall have to spend some time with these to determine whether or not a little shimming of the adapter will get it to run true.

Source of Accessories In The U.S.

Updated 25-Oct-2010

Busy Bee's web site says that they will ship internationally. You have to phone them however to ascertain shipping costs. I don't know how recent this development is or how expensive it is, but I just happened to notice it this evening. Anyway, at least there is a theoretical possibility that owners of the 46-140 and Beaver 3400 lathes can get parts a little more easily.

N.B. After doing a little more searching I have learned that the Grizzly and Busy Bee faceplates are Steelex brand. These faceplates and their respective inserts will occasionally turn up on Amazon and eBay and various other online tool retailers.

• 8-inch faceplate (unthreaded)
  
  
• 4-jaw independent chuck (unthreaded)
  
  
• 7/8-14 spindle adapter (for inboard use)
  
  
• 3/4-16 left hand spindle adapter (for outboard use)

I personally do not own any of the above so I can't vouch for the quality of the items. If you have one or more of these you are invited to post a comment to this article for the benefit of those who follow.

I have since acquired a Steelex faceplate. See this post.

Canadian Source of Parts and Accessories

N.B Hyperlinks updated as of 21-Sep-2010.

U.S. Shipping info added 25-Oct-2010

Busy Bee of Canada stocks a number of 7/8-14 RH and 3/4-16 LH headstock accessories as well as Nova and Oneway scroll chucks, accessory jaw sets and standard Morse Taper tooling. Since the 46-140 was manufactured in Ontario it makes sense you'll be more likely to find parts and accessories there. Their web site says that they now ship to the U.S. and generally internationally, which formerly had not been the case, however it is necessary to phone them to find out the shipping costs involved.

• 6-inch faceplates (already threaded for 7/8-14)
  
  
• 8-inch faceplate (unthreaded) and required 7/8-14 spindle adapter (for inboard turning) or required 3/4-16 left hand spindle adapter (for outboard turning)
  
  
• 6-inch, 4-jaw independent chuck (for holding square and irregularly shaped objects) and required 7/8-14 spindle adapter or required 3/4-16 left hand spindle adapter (for outboard turning)
  
  
• 6-inch, 3-jaw independent chuck (for holding square and irregularly shaped objects) and required 7/8-14 spindle adapter or required 3/4-16 left hand spindle adapter (for outboard turning)
  
  
• 7/8-14 insert for Nova scroll chucks
  
  
• Cole jaw set for Nova chucks
  
  
• No-name brand scroll chuck and required 7/8-14 spindle adapter.
  
  
• Accessory pin jaw set for no-name scroll chuck, above.
  
  
• MT#1 live tailstock center

Is This Lathe Right For Me?

If you are new to woodturning generally, or don't have room in your shop for a really big lathe, then in my opinion you can't go wrong with a 46-140 if you find one that has been well taken care of. It's a solid, durable, high quality machine that will certainly outlive you if you treat it well, and you can do a lot with it.

If you already have a large monetary investment in lathe tooling (scroll chucks, faceplates, etc.) and you want to use them on this lathe then you will be successful adapting the 46-140's headstock to any spindle size except 1" 8tpi.

In other words, if you're willing to buy (or have a machinist fabricate) a spindle adapter then anything smaller than 7/8" or larger than 1.25" in diameter will work.

Why won't 1-8 work? A machinist will (or should) tell you that it's either not possible or just plain unsafe to make a thread adapter that goes from 7/8" to 1" because the root diameter (bottom) of a 1" thread is just ever so slightly larger than 7/8". There would be too little if any metal left to keep the adapter all in one piece. So all you folks with 1-8 headstock accessories are out of luck.

Since the headstock spindle will not accept morse (or jacobs) taper tooling you're mostly out of luck here too, unless you have a scroll chuck. Perfectly serviceable MT #1 adapters may be fabricated from hardwood for mounting in a scroll chuck. This will be demonstrated in future blog postings.

Replacing the headstock spindle with a custom machined one is theoretically possible but doing so would be prohibitively costly unless you happened to have a really good machine shop at your disposal. Your money would be better spent on a larger lathe that has an appropriately sized headstock for your existing tooling.

Newcomers to woodturning are understandably reluctant to even think about creating adapters, faceplates or other workpiece-holding jigs on their own, whether out of wood or any other material. For a beginner that would be putting the cart before the horse. But after a reasonable period of time you will come to appreciate that jig/fixture and tool making are a natural part of the woodturner's craft -- and a source of enjoyment and satisfaction in themselves. And that's the Great Secret about why it is possible to obtain this lathe relatively inexpensively -- most folks (and especially beginners) assume that you must go to a commercial source for all of your accessories. It's just not true.

In sum, this lathe should provide many years of good service to beginning and intermediate turners. If and when the day comes that you discover that you want to become a professional bowl or hollow form turner, you can then move up to a dedicated "pro" machine and turn this one over to someone else who, like yourself now, is looking for a high quality machine at a price that an amateur can afford.